Struct
AdwSpringParams
since: 1.0
Description [src]
struct AdwSpringParams {
/* No available fields */
}
Physical parameters of a spring for AdwSpringAnimation.
Any spring can be described by three parameters: mass, stiffness and damping.
An undamped spring will produce an oscillatory motion which will go on forever.
The frequency and amplitude of the oscillations will be determined by the stiffness (how “strong” the spring is) and its mass (how much “inertia” it has).
If damping is larger than 0, the amplitude of that oscillating motion will exponientally decrease over time. If that damping is strong enough that the spring can’t complete a full oscillation, it’s called an overdamped spring.
If we the spring can oscillate, it’s called an underdamped spring.
The value between these two behaviors is called critical damping; a critically damped spring will comes to rest in the minimum possible time without producing oscillations.
The damping can be replaced by damping ratio, which produces the following springs:
- 0: an undamped spring.
- Between 0 and 1: an underdamped spring.
- 1: a critically damped spring.
- Larger than 1: an overdamped spring.
As such.
Available since: 1.0
Constructors
adw_spring_params_new
Creates a new AdwSpringParams from mass, stiffness and damping_ratio.
since: 1.0
adw_spring_params_new_full
Creates a new AdwSpringParams from mass, stiffness and damping.
since: 1.0