Grcov report - path

1

//! Representation of Bézier paths.

2

//!

3

//! Path data can consume a significant amount of memory in complex SVG documents.  This

4

//! module deals with this as follows:

5

//!

6

//! * The path parser pushes commands into a [`PathBuilder`].  This is a mutable,

7

//! temporary storage for path data.

8

//!

9

//! * Then, the [`PathBuilder`] gets turned into a long-term, immutable [`Path`] that has

10

//! a more compact representation.

11

//!

12

//! The code tries to reduce work in the allocator, by using a [`TinyVec`] with space for at

13

//! least 32 commands on the stack for `PathBuilder`; most paths in SVGs in the wild have

14

//! fewer than 32 commands, and larger ones will spill to the heap.

15

//!

16

//! See these blog posts for details and profiles:

17

//!

18

//! * [Compact representation for path data](https://people.gnome.org/~federico/blog/reducing-memory-consumption-in-librsvg-4.html)

19

//! * [Reducing slack space and allocator work](https://people.gnome.org/~federico/blog/reducing-memory-consumption-in-librsvg-3.html)

20

21

use tinyvec::TinyVec;

22

23

use std::f64;

24

use std::f64::consts::*;

25

use std::slice;

26

27

use crate::float_eq_cairo::ApproxEqCairo;

28

use crate::path_parser::{ParseError, PathParser};

29

use crate::util::clamp;

30

31

/// Whether an arc's sweep should be >= 180 degrees, or smaller.

32

18

#[derive(Debug, Copy, Clone, PartialEq)]

33

9

pub struct LargeArc(pub bool);

34

35

/// Angular direction in which an arc is drawn.

36

2601

#[derive(Debug, Copy, Clone, PartialEq)]

37

pub enum Sweep {

38

    Negative,

39

    Positive,

40

41

42

/// "c" command for paths; describes a cubic Bézier segment.

43

58

#[derive(Debug, Clone, PartialEq, Default)]

44

pub struct CubicBezierCurve {

45

    /// The (x, y) coordinates of the first control point.

46

29

    pub pt1: (f64, f64),

47

    /// The (x, y) coordinates of the second control point.

48

29

    pub pt2: (f64, f64),

49

    /// The (x, y) coordinates of the end point of this path segment.

50

29

    pub to: (f64, f64),

51

52

53

impl CubicBezierCurve {

54

    /// Consumes 6 coordinates and creates a curve segment.

55

290472

    fn from_coords(coords: &mut slice::Iter<'_, f64>) -> CubicBezierCurve {

56

290472

        let pt1 = take_two(coords);

57

290472

        let pt2 = take_two(coords);

58

290472

        let to = take_two(coords);

59

60

290472

        CubicBezierCurve { pt1, pt2, to }

61

290472

62

63

    /// Pushes 6 coordinates to `coords` and returns `PackedCommand::CurveTo`.

64

147470

    fn to_packed_and_coords(&self, coords: &mut Vec<f64>) -> PackedCommand {

65

147470

        coords.push(self.pt1.0);

66

147470

        coords.push(self.pt1.1);

67

147470

        coords.push(self.pt2.0);

68

147470

        coords.push(self.pt2.1);

69

147470

        coords.push(self.to.0);

70

147470

        coords.push(self.to.1);

71

147470

        PackedCommand::CurveTo

72

147470

73

74

75

/// Conversion from endpoint parameterization to center parameterization.

76

///

77

/// SVG path data specifies elliptical arcs in terms of their endpoints, but

78

/// they are easier to process if they are converted to a center parameterization.

79

///

80

/// When attempting to compute the center parameterization of the arc,

81

/// out of range parameters may see an arc omitted or treated as a line.

82

pub enum ArcParameterization {

83

    /// Center parameterization of the arc.

84

    CenterParameters {

85

        /// Center of the ellipse.

86

        center: (f64, f64),

87

        /// Radii of the ellipse (corrected).

88

        radii: (f64, f64),

89

        /// Angle of the start point.

90

        theta1: f64,

91

        /// Delta angle to the end point.

92

        delta_theta: f64,

93

},

94

    /// Treat the arc as a line to the end point.

95

    LineTo,

96

    /// Omit the arc.

97

    Omit,

98

99

100

/// "a" command for paths; describes  an elliptical arc in terms of its endpoints.

101

18

#[derive(Debug, Clone, PartialEq)]

102

pub struct EllipticalArc {

103

    /// The (x-axis, y-axis) radii for the ellipse.

104

9

    pub r: (f64, f64),

105

    /// The rotation angle in degrees for the ellipse's x-axis

106

    /// relative to the x-axis of the user coordinate system.

107

9

    pub x_axis_rotation: f64,

108

    /// Flag indicating whether the arc sweep should be

109

    /// greater than or equal to 180 degrees, or smaller than 180 degrees.

110

9

    pub large_arc: LargeArc,

111

    /// Flag indicating the angular direction in which the arc is drawn.

112

9

    pub sweep: Sweep,

113

    /// The (x, y) coordinates for the start point of this path segment.

114

9

    pub from: (f64, f64),

115

    /// The (x, y) coordinates for the end point of this path segment.

116

9

    pub to: (f64, f64),

117

118

119

impl EllipticalArc {

120

    /// Calculates a center parameterization from the endpoint parameterization.

121

///

122

    /// Radii may be adjusted if there is no solution.

123

///

124

    /// See section [B.2.4. Conversion from endpoint to center

125

    /// parameterization](https://www.w3.org/TR/SVG2/implnote.html#ArcConversionEndpointToCenter)

126

2592

    pub(crate) fn center_parameterization(&self) -> ArcParameterization {

127

        let Self {

128

2592

            r: (mut rx, mut ry),

129

2592

            x_axis_rotation,

130

2592

            large_arc,

131

2592

            sweep,

132

2592

            from: (x1, y1),

133

2592

            to: (x2, y2),

134

        } = *self;

135

136

        // Ensure radii are non-zero.

137

        // Otherwise this arc is treated as a line segment joining the end points.

138

//

139

        // A bit further down we divide by the square of the radii.

140

        // Check that we won't divide by zero.

141

        // See http://bugs.debian.org/508443

142

2592

        if rx * rx < f64::EPSILON || ry * ry < f64::EPSILON {

143

            return ArcParameterization::LineTo;

144

145

146

2592

        let is_large_arc = large_arc.0;

147

2592

        let is_positive_sweep = sweep == Sweep::Positive;

148

149

2592

        let phi = x_axis_rotation * PI / 180.0;

150

2592

        let (sin_phi, cos_phi) = phi.sin_cos();

151

152

        // Ensure radii are positive.

153

2592

        rx = rx.abs();

154

2592

        ry = ry.abs();

155

156

        // The equations simplify after a translation which places

157

        // the origin at the midpoint of the line joining (x1, y1) to (x2, y2),

158

        // followed by a rotation to line up the coordinate axes

159

        // with the axes of the ellipse.

160

        // All transformed coordinates will be written with primes.

161

//

162

        // Compute (x1', y1').

163

2592

        let mid_x = (x1 - x2) / 2.0;

164

2592

        let mid_y = (y1 - y2) / 2.0;

165

2592

        let x1_ = cos_phi * mid_x + sin_phi * mid_y;

166

2592

        let y1_ = -sin_phi * mid_x + cos_phi * mid_y;

167

168

        // Ensure radii are large enough.

169

2592

        let lambda = (x1_ / rx).powi(2) + (y1_ / ry).powi(2);

170

2592

        if lambda > 1.0 {

171

            // If not, scale up the ellipse uniformly

172

            // until there is exactly one solution.

173

86

            rx *= lambda.sqrt();

174

86

            ry *= lambda.sqrt();

175

176

177

        // Compute the transformed center (cx', cy').

178

2592

        let d = (rx * y1_).powi(2) + (ry * x1_).powi(2);

179

2592

        if d == 0.0 {

180

            return ArcParameterization::Omit;

181

182

        let k = {

183

2592

            let mut k = ((rx * ry).powi(2) / d - 1.0).abs().sqrt();

184

2592

            if is_positive_sweep == is_large_arc {

185

1214

                k = -k;

186

187

2592

188

};

189

2592

        let cx_ = k * rx * y1_ / ry;

190

2592

        let cy_ = -k * ry * x1_ / rx;

191

192

        // Compute the center (cx, cy).

193

2592

        let cx = cos_phi * cx_ - sin_phi * cy_ + (x1 + x2) / 2.0;

194

2592

        let cy = sin_phi * cx_ + cos_phi * cy_ + (y1 + y2) / 2.0;

195

196

        // Compute the start angle θ1.

197

2592

        let ux = (x1_ - cx_) / rx;

198

2592

        let uy = (y1_ - cy_) / ry;

199

2592

        let u_len = (ux * ux + uy * uy).abs().sqrt();

200

2592

        if u_len == 0.0 {

201

            return ArcParameterization::Omit;

202

203

2592

        let cos_theta1 = clamp(ux / u_len, -1.0, 1.0);

204

        let theta1 = {

205

2592

            let mut theta1 = cos_theta1.acos();

206

2592

            if uy < 0.0 {

207

1015

                theta1 = -theta1;

208

209

2592

            theta1

210

};

211

212

        // Compute the total delta angle Δθ.

213

2592

        let vx = (-x1_ - cx_) / rx;

214

2592

        let vy = (-y1_ - cy_) / ry;

215

2592

        let v_len = (vx * vx + vy * vy).abs().sqrt();

216

2592

        if v_len == 0.0 {

217

            return ArcParameterization::Omit;

218

219

2592

        let dp_uv = ux * vx + uy * vy;

220

2592

        let cos_delta_theta = clamp(dp_uv / (u_len * v_len), -1.0, 1.0);

221

        let delta_theta = {

222

2592

            let mut delta_theta = cos_delta_theta.acos();

223

2592

            if ux * vy - uy * vx < 0.0 {

224

870

                delta_theta = -delta_theta;

225

226

2592

            if is_positive_sweep && delta_theta < 0.0 {

227

124

                delta_theta += PI * 2.0;

228

2468

            } else if !is_positive_sweep && delta_theta > 0.0 {

229

392

                delta_theta -= PI * 2.0;

230

231

2592

            delta_theta

232

};

233

234

2592

        ArcParameterization::CenterParameters {

235

2592

            center: (cx, cy),

236

2592

            radii: (rx, ry),

237

            theta1,

238

            delta_theta,

239

240

2592

241

242

    /// Consumes 7 coordinates and creates an arc segment.

243

2606

    fn from_coords(

244

        large_arc: LargeArc,

245

        sweep: Sweep,

246

        coords: &mut slice::Iter<'_, f64>,

247

    ) -> EllipticalArc {

248

2606

        let r = take_two(coords);

249

2606

        let x_axis_rotation = take_one(coords);

250

2606

        let from = take_two(coords);

251

2606

        let to = take_two(coords);

252

253

2606

        EllipticalArc {

254

r,

255

            x_axis_rotation,

256

            large_arc,

257

            sweep,

258

            from,

259

to,

260

261

2606

262

263

    /// Pushes 7 coordinates to `coords` and returns one of `PackedCommand::Arc*`.

264

1415

    fn to_packed_and_coords(&self, coords: &mut Vec<f64>) -> PackedCommand {

265

1415

        coords.push(self.r.0);

266

1415

        coords.push(self.r.1);

267

1415

        coords.push(self.x_axis_rotation);

268

1415

        coords.push(self.from.0);

269

1415

        coords.push(self.from.1);

270

1415

        coords.push(self.to.0);

271

1415

        coords.push(self.to.1);

272

273

1415

        match (self.large_arc, self.sweep) {

274

377

            (LargeArc(false), Sweep::Negative) => PackedCommand::ArcSmallNegative,

275

628

            (LargeArc(false), Sweep::Positive) => PackedCommand::ArcSmallPositive,

276

195

            (LargeArc(true), Sweep::Negative) => PackedCommand::ArcLargeNegative,

277

215

            (LargeArc(true), Sweep::Positive) => PackedCommand::ArcLargePositive,

278

279

1415

280

281

282

/// Turns an arc segment into a cubic bezier curve.

283

///

284

/// Takes the center, the radii and the x-axis rotation of the ellipse,

285

/// the angles of the start and end points,

286

/// and returns cubic bezier curve parameters.

287

4024

pub(crate) fn arc_segment(

288

    c: (f64, f64),

289

    r: (f64, f64),

290

    x_axis_rotation: f64,

291

    th0: f64,

292

    th1: f64,

293

) -> CubicBezierCurve {

294

4024

    let (cx, cy) = c;

295

4024

    let (rx, ry) = r;

296

4024

    let phi = x_axis_rotation * PI / 180.0;

297

4024

    let (sin_phi, cos_phi) = phi.sin_cos();

298

4024

    let (sin_th0, cos_th0) = th0.sin_cos();

299

4024

    let (sin_th1, cos_th1) = th1.sin_cos();

300

301

4024

    let th_half = 0.5 * (th1 - th0);

302

4024

    let t = (8.0 / 3.0) * (th_half * 0.5).sin().powi(2) / th_half.sin();

303

4024

    let x1 = rx * (cos_th0 - t * sin_th0);

304

4024

    let y1 = ry * (sin_th0 + t * cos_th0);

305

4024

    let x3 = rx * cos_th1;

306

4024

    let y3 = ry * sin_th1;

307

4024

    let x2 = x3 + rx * (t * sin_th1);

308

4024

    let y2 = y3 + ry * (-t * cos_th1);

309

310

4024

    CubicBezierCurve {

311

4024

        pt1: (

312

4024

            cx + cos_phi * x1 - sin_phi * y1,

313

4024

            cy + sin_phi * x1 + cos_phi * y1,

314

),

315

4024

        pt2: (

316

4024

            cx + cos_phi * x2 - sin_phi * y2,

317

4024

            cy + sin_phi * x2 + cos_phi * y2,

318

),

319

4024

        to: (

320

4024

            cx + cos_phi * x3 - sin_phi * y3,

321

4024

            cy + sin_phi * x3 + cos_phi * y3,

322

),

323

324

4024

325

326

/// Long-form version of a single path command.

327

///

328

/// This is returned from iterators on paths and subpaths.

329

60713215

#[derive(Clone, Default, Debug, PartialEq)]

330

pub enum PathCommand {

331

144

    MoveTo(f64, f64),

332

49

    LineTo(f64, f64),

333

29

    CurveTo(CubicBezierCurve),

334

9

    Arc(EllipticalArc),

335

336

    // The #[default] is just so we can use TinyVec, whose type

337

    // parameter requires T: Default.  There is no actual default for

338

    // path commands in the SVG spec; this is just our implementation

339

    // detail.

340

    #[default]

341

30356373

    ClosePath,

342

343

344

impl PathCommand {

345

    /// Returns the number of coordinate values that this command will generate in a `Path`.

346

5954341

    fn num_coordinates(&self) -> usize {

347

5954341

        match *self {

348

969349

            PathCommand::MoveTo(..) => 2,

349

3868984

            PathCommand::LineTo(..) => 2,

350

147469

            PathCommand::CurveTo(_) => 6,

351

1415

            PathCommand::Arc(_) => 7,

352

967124

            PathCommand::ClosePath => 0,

353

354

5954341

355

356

    /// Pushes a command's coordinates to `coords` and returns the corresponding `PackedCommand`.

357

5953026

    fn to_packed(&self, coords: &mut Vec<f64>) -> PackedCommand {

358

5953026

        match *self {

359

969513

            PathCommand::MoveTo(x, y) => {

360

969513

                coords.push(x);

361

969513

                coords.push(y);

362

969513

                PackedCommand::MoveTo

363

969513

364

365

3867690

            PathCommand::LineTo(x, y) => {

366

3867690

                coords.push(x);

367

3867690

                coords.push(y);

368

3867690

                PackedCommand::LineTo

369

3867690

370

371

147470

            PathCommand::CurveTo(ref c) => c.to_packed_and_coords(coords),

372

373

1415

            PathCommand::Arc(ref a) => a.to_packed_and_coords(coords),

374

375

966938

            PathCommand::ClosePath => PackedCommand::ClosePath,

376

377

5953026

378

379

    /// Consumes a packed command's coordinates from the `coords` iterator and returns the rehydrated `PathCommand`.

380

11898314

    fn from_packed(packed: PackedCommand, coords: &mut slice::Iter<'_, f64>) -> PathCommand {

381

11898314

        match packed {

382

            PackedCommand::MoveTo => {

383

1935323

                let x = take_one(coords);

384

1935323

                let y = take_one(coords);

385

1935323

                PathCommand::MoveTo(x, y)

386

1935323

387

388

            PackedCommand::LineTo => {

389

7735267

                let x = take_one(coords);

390

7735267

                let y = take_one(coords);

391

7735267

                PathCommand::LineTo(x, y)

392

7735267

393

394

290475

            PackedCommand::CurveTo => PathCommand::CurveTo(CubicBezierCurve::from_coords(coords)),

395

396

1934643

            PackedCommand::ClosePath => PathCommand::ClosePath,

397

398

752

            PackedCommand::ArcSmallNegative => PathCommand::Arc(EllipticalArc::from_coords(

399

752

                LargeArc(false),

400

752

                Sweep::Negative,

401

                coords,

402

752

)),

403

404

995

            PackedCommand::ArcSmallPositive => PathCommand::Arc(EllipticalArc::from_coords(

405

995

                LargeArc(false),

406

995

                Sweep::Positive,

407

                coords,

408

995

)),

409

410

389

            PackedCommand::ArcLargeNegative => PathCommand::Arc(EllipticalArc::from_coords(

411

389

                LargeArc(true),

412

389

                Sweep::Negative,

413

                coords,

414

389

)),

415

416

470

            PackedCommand::ArcLargePositive => PathCommand::Arc(EllipticalArc::from_coords(

417

470

                LargeArc(true),

418

470

                Sweep::Positive,

419

                coords,

420

470

)),

421

422

11898314

423

424

425

/// Constructs a path out of commands.

426

///

427

/// Create this with `PathBuilder::default`; you can then add commands to it or call the

428

/// `parse` method.  When you are finished constructing a path builder, turn it into a

429

/// `Path` with `into_path`.  You can then iterate on that `Path`'s commands with its

430

/// methods.

431

1898514

#[derive(Default)]

432

pub struct PathBuilder {

433

949257

    path_commands: TinyVec<[PathCommand; 32]>,

434

435

436

/// An immutable path with a compact representation.

437

///

438

/// This is constructed from a `PathBuilder` once it is finished.  You

439

/// can get an iterator for the path's commands with the `iter`

440

/// method, or an iterator for its subpaths (subsequences of commands that

441

/// start with a MoveTo) with the `iter_subpath` method.

442

///

443

/// The variants in `PathCommand` have different sizes, so a simple array of `PathCommand`

444

/// would have a lot of slack space.  We reduce this to a minimum by separating the

445

/// commands from their coordinates.  Then, we can have two dense arrays: one with a compact

446

/// representation of commands, and another with a linear list of the coordinates for each

447

/// command.

448

///

449

/// Both `PathCommand` and `PackedCommand` know how many coordinates they ought to

450

/// produce, with their `num_coordinates` methods.

451

///

452

/// This struct implements `Default`, and it yields an empty path.

453

1787

#[derive(Default)]

454

pub struct Path {

455

1787

    commands: Box<[PackedCommand]>,

456

1787

    coords: Box<[f64]>,

457

458

459

/// Packed version of a `PathCommand`, used in `Path`.

460

///

461

/// MoveTo/LineTo/CurveTo have only pairs of coordinates, while ClosePath has no coordinates,

462

/// and EllipticalArc has a bunch of coordinates plus two flags.  Here we represent the flags

463

/// as four variants.

464

///

465

/// This is `repr(u8)` to keep it as small as possible.

466

#[repr(u8)]

467

#[derive(Debug, Clone, Copy)]

468

enum PackedCommand {

469

    MoveTo,

470

    LineTo,

471

    CurveTo,

472

    ArcSmallNegative,

473

    ArcSmallPositive,

474

    ArcLargeNegative,

475

    ArcLargePositive,

476

    ClosePath,

477

478

479

impl PackedCommand {

480

    // Returns the number of coordinate values that this command will generate in a `Path`.

481

11879093

    fn num_coordinates(&self) -> usize {

482

11879093

        match *self {

483

1936695

            PackedCommand::MoveTo => 2,

484

7717676

            PackedCommand::LineTo => 2,

485

290413

            PackedCommand::CurveTo => 6,

486

            PackedCommand::ArcSmallNegative

487

            | PackedCommand::ArcSmallPositive

488

            | PackedCommand::ArcLargeNegative

489

2588

            | PackedCommand::ArcLargePositive => 7,

490

1931721

            PackedCommand::ClosePath => 0,

491

492

11879093

493

494

495

impl PathBuilder {

496

1938

    pub fn parse(&mut self, path_str: &str) -> Result<(), ParseError> {

497

1938

        let mut parser = PathParser::new(self, path_str);

498

1938

        parser.parse()

499

1938

500

501

    /// Consumes the `PathBuilder` and returns a compact, immutable representation as a `Path`.

502

950190

    pub fn into_path(self) -> Path {

503

950190

        let num_coords = self

504

            .path_commands

505

            .iter()

506

            .map(PathCommand::num_coordinates)

507

            .sum();

508

509

949436

        let mut coords = Vec::with_capacity(num_coords);

510

948682

        let packed_commands: Vec<_> = self

511

            .path_commands

512

            .iter()

513

6899634

            .map(|cmd| cmd.to_packed(&mut coords))

514

            .collect();

515

516

947920

        Path {

517

949180

            commands: packed_commands.into_boxed_slice(),

518

947920

            coords: coords.into_boxed_slice(),

519

520

947920

521

522

    /// Adds a MoveTo command to the path.

523

969701

    pub fn move_to(&mut self, x: f64, y: f64) {

524

969701

        self.path_commands.push(PathCommand::MoveTo(x, y));

525

969701

526

527

    /// Adds a LineTo command to the path.

528

3871191

    pub fn line_to(&mut self, x: f64, y: f64) {

529

3871191

        self.path_commands.push(PathCommand::LineTo(x, y));

530

3871191

531

532

    /// Adds a CurveTo command to the path.

533

147470

    pub fn curve_to(&mut self, x2: f64, y2: f64, x3: f64, y3: f64, x4: f64, y4: f64) {

534

147470

        let curve = CubicBezierCurve {

535

147470

            pt1: (x2, y2),

536

147470

            pt2: (x3, y3),

537

147470

            to: (x4, y4),

538

};

539

147470

        self.path_commands.push(PathCommand::CurveTo(curve));

540

147470

541

542

    /// Adds an EllipticalArc command to the path.

543

1415

    pub fn arc(

544

        &mut self,

545

        x1: f64,

546

        y1: f64,

547

        rx: f64,

548

        ry: f64,

549

        x_axis_rotation: f64,

550

        large_arc: LargeArc,

551

        sweep: Sweep,

552

        x2: f64,

553

        y2: f64,

554

) {

555

1415

        let arc = EllipticalArc {

556

1415

            r: (rx, ry),

557

            x_axis_rotation,

558

            large_arc,

559

            sweep,

560

1415

            from: (x1, y1),

561

1415

            to: (x2, y2),

562

};

563

1415

        self.path_commands.push(PathCommand::Arc(arc));

564

1415

565

566

    /// Adds a ClosePath command to the path.

567

967756

    pub fn close_path(&mut self) {

568

967756

        self.path_commands.push(PathCommand::ClosePath);

569

967756

570

571

572

/// An iterator over the subpaths of a `Path`.

573

pub struct SubPathIter<'a> {

574

    path: &'a Path,

575

    commands_start: usize,

576

    coords_start: usize,

577

578

579

/// A slice of commands and coordinates with a single `MoveTo` at the beginning.

580

pub struct SubPath<'a> {

581

    commands: &'a [PackedCommand],

582

    coords: &'a [f64],

583

584

585

/// An iterator over the commands/coordinates of a subpath.

586

pub struct SubPathCommandsIter<'a> {

587

    commands_iter: slice::Iter<'a, PackedCommand>,

588

    coords_iter: slice::Iter<'a, f64>,

589

590

591

impl<'a> SubPath<'a> {

592

    /// Returns an iterator over the subpath's commands.

593

1934457

    pub fn iter_commands(&self) -> SubPathCommandsIter<'_> {

594

1934457

        SubPathCommandsIter {

595

1934457

            commands_iter: self.commands.iter(),

596

1934457

            coords_iter: self.coords.iter(),

597

598

1934457

599

600

    /// Each subpath starts with a MoveTo; this returns its `(x, y)` coordinates.

601

77

    pub fn origin(&self) -> (f64, f64) {

602

77

        let first = *self.commands.first().unwrap();

603

77

        assert!(matches!(first, PackedCommand::MoveTo));

604

77

        let command = PathCommand::from_packed(first, &mut self.coords.iter());

605

606

77

        match command {

607

77

            PathCommand::MoveTo(x, y) => (x, y),

608

            _ => unreachable!(),

609

610

77

611

612

    /// Returns whether the length of a subpath is approximately zero.

613

37

    pub fn is_zero_length(&self) -> bool {

614

37

        let (cur_x, cur_y) = self.origin();

615

616

38

        for cmd in self.iter_commands().skip(1) {

617

71

            let (end_x, end_y) = match cmd {

618

                PathCommand::MoveTo(_, _) => unreachable!(

619

                    "A MoveTo cannot appear in a subpath if it's not the first element"

620

),

621

33

                PathCommand::LineTo(x, y) => (x, y),

622

1

                PathCommand::CurveTo(curve) => curve.to,

623

1

                PathCommand::Arc(arc) => arc.to,

624

                // If we get a `ClosePath and haven't returned yet then we haven't moved at all making

625

                // it an empty subpath`

626

1

                PathCommand::ClosePath => return true,

627

};

628

629

35

            if !end_x.approx_eq_cairo(cur_x) || !end_y.approx_eq_cairo(cur_y) {

630

34

                return false;

631

632

633

634

2

        true

635

37

636

637

638

impl<'a> Iterator for SubPathIter<'a> {

639

    type Item = SubPath<'a>;

640

641

3833128

    fn next(&mut self) -> Option<Self::Item> {

642

        // If we ended on our last command in the previous iteration, we're done here

643

3833128

        if self.commands_start >= self.path.commands.len() {

644

1898436

            return None;

645

646

647

        // Otherwise we have at least one command left, we setup the slice to be all the remaining

648

        // commands.

649

1934692

        let commands = &self.path.commands[self.commands_start..];

650

651

1934692

        assert!(matches!(commands.first().unwrap(), PackedCommand::MoveTo));

652

1934692

        let mut num_coords = PackedCommand::MoveTo.num_coordinates();

653

654

        // Skip over the initial MoveTo

655

11871725

        for (i, cmd) in commands.iter().enumerate().skip(1) {

656

            // If we encounter a MoveTo , we ended our current subpath, we

657

            // return the commands until this command and set commands_start to be the index of the

658

            // next command

659

9975940

            if let PackedCommand::MoveTo = cmd {

660

38907

                let subpath_coords_start = self.coords_start;

661

662

38907

                self.commands_start += i;

663

38907

                self.coords_start += num_coords;

664

665

38907

                return Some(SubPath {

666

38907

                    commands: &commands[..i],

667

38907

                    coords: &self.path.coords

668

38907

                        [subpath_coords_start..subpath_coords_start + num_coords],

669

});

670

            } else {

671

9937033

                num_coords += cmd.num_coordinates();

672

673

674

675

        // If we didn't find any MoveTo, we're done here. We return the rest of the path

676

        // and set commands_start so next iteration will return None.

677

678

1895785

        self.commands_start = self.path.commands.len();

679

680

1895785

        let subpath_coords_start = self.coords_start;

681

1895785

        assert!(subpath_coords_start + num_coords == self.path.coords.len());

682

1895785

        self.coords_start = self.path.coords.len();

683

684

1895785

        Some(SubPath {

685

            commands,

686

1895785

            coords: &self.path.coords[subpath_coords_start..],

687

})

688

3833128

689

690

691

impl<'a> Iterator for SubPathCommandsIter<'a> {

692

    type Item = PathCommand;

693

694

13834420

    fn next(&mut self) -> Option<Self::Item> {

695

27668840

        self.commands_iter

696

            .next()

697

25723570

            .map(|packed| PathCommand::from_packed(*packed, &mut self.coords_iter))

698

13834420

699

700

701

impl Path {

702

    /// Get an iterator over a path `Subpath`s.

703

1898101

    pub fn iter_subpath(&self) -> SubPathIter<'_> {

704

1898101

        SubPathIter {

705

            path: self,

706

            commands_start: 0,

707

            coords_start: 0,

708

709

1898101

710

711

    /// Get an iterator over a path's commands.

712

288

    pub fn iter(&self) -> impl Iterator<Item = PathCommand> + '_ {

713

288

        let commands = self.commands.iter();

714

288

        let mut coords = self.coords.iter();

715

716

1026

        commands.map(move |cmd| PathCommand::from_packed(*cmd, &mut coords))

717

288

718

719

    /// Returns whether there are no commands in the path.

720

2845881

    pub fn is_empty(&self) -> bool {

721

2845881

        self.commands.is_empty()

722

2845881

723

724

725

21051412

fn take_one(iter: &mut slice::Iter<'_, f64>) -> f64 {

726

21051412

    *iter.next().unwrap()

727

21051412

728

729

879078

fn take_two(iter: &mut slice::Iter<'_, f64>) -> (f64, f64) {

730

879078

    (take_one(iter), take_one(iter))

731

879078

732

733

#[cfg(test)]

734

mod tests {

735

    use super::*;

736

737

    #[test]

738

2

    fn empty_builder() {

739

1

        let builder = PathBuilder::default();

740

1

        let path = builder.into_path();

741

1

        assert!(path.is_empty());

742

1

        assert_eq!(path.iter().count(), 0);

743

2

744

745

    #[test]

746

2

    fn empty_path() {

747

1

        let path = Path::default();

748

1

        assert!(path.is_empty());

749

1

        assert_eq!(path.iter().count(), 0);

750

2

751

752

    #[test]

753

2

    fn all_commands() {

754

1

        let mut builder = PathBuilder::default();

755

1

        builder.move_to(42.0, 43.0);

756

1

        builder.line_to(42.0, 43.0);

757

1

        builder.curve_to(42.0, 43.0, 44.0, 45.0, 46.0, 47.0);

758

1

        builder.arc(

759

            42.0,

760

            43.0,

761

            44.0,

762

            45.0,

763

            46.0,

764

1

            LargeArc(true),

765

1

            Sweep::Positive,

766

            47.0,

767

            48.0,

768

);

769

1

        builder.close_path();

770

1

        let path = builder.into_path();

771

1

        assert!(path.iter().eq(vec![

772

1

            PathCommand::MoveTo(42.0, 43.0),

773

1

            PathCommand::LineTo(42.0, 43.0),

774

1

            PathCommand::CurveTo(CubicBezierCurve {

775

1

                pt1: (42.0, 43.0),

776

1

                pt2: (44.0, 45.0),

777

1

                to: (46.0, 47.0),

778

}),

779

1

            PathCommand::Arc(EllipticalArc {

780

1

                from: (42.0, 43.0),

781

1

                r: (44.0, 45.0),

782

1

                to: (47.0, 48.0),

783

                x_axis_rotation: 46.0,

784

1

                large_arc: LargeArc(true),

785

1

                sweep: Sweep::Positive,

786

}),

787

1

            PathCommand::ClosePath,

788

        ]));

789

2

790

791

    #[test]

792

2

    fn subpath_iter() {

793

1

        let mut builder = PathBuilder::default();

794

1

        builder.move_to(42.0, 43.0);

795

1

        builder.line_to(42.0, 43.0);

796

1

        builder.close_path();

797

798

1

        builder.move_to(22.0, 22.0);

799

1

        builder.curve_to(22.0, 22.0, 44.0, 45.0, 46.0, 47.0);

800

801

1

        builder.move_to(69.0, 69.0);

802

1

        builder.line_to(42.0, 43.0);

803

1

        let path = builder.into_path();

804

805

1

        let subpaths = path

806

            .iter_subpath()

807

3

            .map(|subpath| {

808

3

809

3

                    subpath.origin(),

810

3

                    subpath.iter_commands().collect::<Vec<PathCommand>>(),

811

812

3

})

813

            .collect::<Vec<((f64, f64), Vec<PathCommand>)>>();

814

815

2

        assert_eq!(

816

            subpaths,

817

2

            vec![

818

1

819

1

                    (42.0, 43.0),

820

1

                    vec![

821

1

                        PathCommand::MoveTo(42.0, 43.0),

822

1

                        PathCommand::LineTo(42.0, 43.0),

823

1

                        PathCommand::ClosePath

824

825

),

826

1

827

1

                    (22.0, 22.0),

828

1

                    vec![

829

1

                        PathCommand::MoveTo(22.0, 22.0),

830

1

                        PathCommand::CurveTo(CubicBezierCurve {

831

1

                            pt1: (22.0, 22.0),

832

1

                            pt2: (44.0, 45.0),

833

1

                            to: (46.0, 47.0)

834

})

835

836

),

837

1

838

1

                    (69.0, 69.0),

839

1

                    vec![

840

1

                        PathCommand::MoveTo(69.0, 69.0),

841

1

                        PathCommand::LineTo(42.0, 43.0)

842

843

844

845

);

846

2

847

848

    #[test]

849

2

    fn zero_length_subpaths() {

850

1

        let mut builder = PathBuilder::default();

851

1

        builder.move_to(42.0, 43.0);

852

1

        builder.move_to(44.0, 45.0);

853

1

        builder.close_path();

854

1

        builder.move_to(46.0, 47.0);

855

1

        builder.line_to(48.0, 49.0);

856

857

1

        let path = builder.into_path();

858

859

1

        let subpaths = path

860

            .iter_subpath()

861

3

            .map(|subpath| (subpath.is_zero_length(), subpath.origin()))

862

            .collect::<Vec<(bool, (f64, f64))>>();

863

864

2

        assert_eq!(

865

            subpaths,

866

1

            vec![

867

1

                (true, (42.0, 43.0)),

868

1

                (true, (44.0, 45.0)),

869

1

                (false, (46.0, 47.0)),

870

871

);

872

2

873